Specification: Part Number 1207942 Ripple: ≤ 10 % Configuration method: Hard wired Automatic beam coding: + Category: Category 2 (EN ISO 13849) External device monitoring (EDM): + Beam coding: + Protection class: III (EN 61140) Permitted cable length: ≤ 20 m Ambient operating temperature: -20 °C ... +55 °C Cascaded: - Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching cu
Specification: Part Number 1207885 Power consumption: ≤ 3 A External device monitoring (EDM): + Air humidity: 15 % ... 95 %, non-condensing Configuration method: Hard wired Cascaded: + Category: Category 2 (EN ISO 13849) Response time: ≤ 13 ms Cable length: 160 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Display
Specification: Part Number 1207961 Protective field height: 120 mm Cascaded: - Housing material: Aluminum alloy ALMGSI 0.5 Conductor cross-section: 0.34 mm² Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock: + Typical range: 0 m ... 8 m Safe SICK device communication via EFI/SDL: - Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Connecti
Specification: Part Number 1207943 PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Type: Type 2 (IEC 61496) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Cable length: 160 mm Safe SICK device communication via EFI/SDL: - Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistan
Specification: Part Number 1207962 Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Power consumption: ≤ 3 A Synchronization: Optical, without separate synchronization Protective field height: 180 mm Automatic beam coding: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Maximum demand rate:
Specification: Part Number 1207887 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Ripple: ≤ 10 % Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm Air humidity: 15 % ... 95 %, non-condensing Resolution: 24 mm Synchronization: Optical, without separate synchron
Specification: Part Number 1207964 Switching voltage LOW: 2 V DC External device monitoring (EDM): + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Storage temperature: -25 °C ... +70 °C Housing cross-section (incl. system connection): 15 mm x 32 mm Synchronization: Optical, without separate synchronization PFHd: Standalone system: 2.4 1E-08 (E
Specification: Part Number 1207947 Protective field height: 420 mm Display elements: LEDs Housing material: Aluminum alloy ALMGSI 0.5 Enclosure rating: IP 65 (EN 60529) Connection type: Male connector M12, 5-pin Ripple: ≤ 10 % Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Storage temperature: -25 °C ... +70 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC)
Specification: Part Number 1207890 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Type: Type 2 (IEC 61496) Safe state in the event of a fault: At least one OSSD is in the OFF state. Cascaded: + Category: Category 2 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C TM (mission time): 20 a (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Conduct
Specification: Part Number 1207891 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Protection class: III (EN 61140) Typical range: 0 m ... 8 m Switching voltage LOW: 2 V DC Housing cross-section (incl. system connection): 15 mm x 32 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Power consumption: ≤ 3 A Display elements: LEDs Ripple:
Specification: Part Number 1207910 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Weight: 175 g Protection class: III (EN 61140) Automatic beam coding: + Connection type: Male connector M12, 5-pin Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) External device monitoring (EDM): + Protective
Specification: Part Number 1207949 Configuration method: Hard wired TM (mission time): 20 a (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Automatic beam coding: + Switching current: 300 mA Air humidity: 15 % ... 95 %, non-condensing Storage temperature: -25 °C ... +70 °C Conductor cross-section: 0.34
Specification: Part Number 1207892 Conductor cross-section: 0.34 mm² Response time: ≤ 13 ms Synchronization: Optical, without separate synchronization Restart interlock: + Configuration method: Hard wired TM (mission time): 20 a (EN ISO 13849) Connection type extension connection: Female connector M12, 5-pin Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safe state in the event of a fault: At least
Specification: Part Number 1207950 Category: Category 2 (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Protection class: III (EN 61140) Resolution: 24 mm Switching voltage LOW: 2 V DC Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Response time: ≤ 13 ms Power consumption: ≤ 3 A Housing material: Aluminum alloy ALMGSI 0.5 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC)
Specification: Part Number 1207893 Test rate (internal test): 47 /s Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Display elements: LEDs Automatic beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Storage temperature: -25 °C ... +70 °C Switching voltage LOW: 2 V DC Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored
Specification: Part Number 1207969 External device monitoring (delivery status): Deactivated Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Beam coding: + Protective field height: 600 mm Connection type: Male connector M12, 5-pin Cascaded: - Weight: 215 g Enclosure rating: IP 65 (EN 60529) Type of output: PNP semiconductors, short-circuit protecte
Specification: Part Number 1207932 Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Ripple: ≤ 10 % Weight: 235 g Restart interlock: + Beam coding: + Resolution: 14 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Safe SICK device communication via EFI/SDL: - Cascaded: - Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) External device monit
Specification: Part Number 1207951 Conductor cross-section: 0.34 mm² Switching current: 300 mA Air humidity: 15 % ... 95 %, non-condensing Type: Type 2 (IEC 61496) Category: Category 2 (EN ISO 13849) Test rate (internal test): 58 /s Synchronization: Optical, without separate synchronization Safe SICK device communication via EFI/SDL: - Cascaded: - Connection type: Male connector M12, 5-pin Supply v
Specification: Part Number 1207894 PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Conductor cross-section: 0.34 mm² Weight: 235 g Protective field height: 660 mm Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 47 /s Type: Type 2 (IEC 61496) Housing cross-section (incl. system conn
Specification: Part Number 1207913 Conductor cross-section: 0.34 mm² Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Safe SICK device communication via EFI/SDL: - Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Beam coding: + Cas
Specification: Part Number 1207895 Connection type: Male connector M12, 5-pin Maximum demand rate: 28 /min (EN ISO 13849) Protective field height: 720 mm Resolution: 24 mm Response time: ≤ 13 ms Switching current: 300 mA TM (mission time): 20 a (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 47 /s
Specification: Part Number 1207914 Ripple: ≤ 10 % Response time: ≤ 13 ms Air humidity: 15 % ... 95 %, non-condensing Restart interlock (delivery status): Deactivated PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Connection type extension connection: Female connector M12, 5-pin Protection class: III (EN 61140) Protective field height: 720 mm Switching voltage LOW: 2 V DC Connection type: M
Specification: Part Number 1207953 Conductor cross-section: 0.34 mm² Safe state in the event of a fault: At least one OSSD is in the OFF state. Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Scanning range: 0 m ... 6 m External device monitoring (EDM): + Typical range: 0 m ... 8 m Housing material: Aluminum alloy ALMGSI 0
Specification: Part Number 1207896 Connection type extension connection: Female connector M12, 5-pin Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) External device monitoring (delivery status): Deactivated Power consumption: ≤ 3 A Safe SICK device communication via EFI/SDL: - Cascaded: + Air humidity: 15 % ... 95 %,
Specification: Part Number 1207915 Typical range: 0 m ... 8 m Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Type: Type 2 (IEC 61496) Safe SICK device communication via EFI/SDL: - Air humidity: 15 % ... 95 %, non-condensing Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching current: 300 mA TM (mission time): 20 a (EN ISO 1
Specification: Part Number 1207935 External device monitoring (EDM): + Switching voltage LOW: 2 V DC Beam coding: + Power consumption: ≤ 3 A Restart interlock (delivery status): Deactivated Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Cascaded: - Type: Type 2 (IEC 61496) Test rate (internal test): 58 /s Maximum demand rate: 34 /min (EN ISO 13849) Conduct
Specification: Part Number 1207954 TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Typical range: 0 m ... 8 m Beam coding: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Resolution: 24 mm Restart interlock (delivery status): Deactivated Synchronization: Optical, without
Specification: Part Number 1207840 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Connection type: Male connector M12, 5-pin Beam coding: + Display elements: LEDs Category: Category 2 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Cable length: 700 mm Protection class: III (EN 61140) Type of
Specification: Part Number 1207897 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Category: Category 2 (EN ISO 13849) PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Typical range: 0 m ... 8 m Switching current: 300 mA Protective field height: 840 mm Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Display elements: LEDs Enclosure rating: IP 65 (EN 6052
