C2MT-06624BBC04FE0

Specification: Part Number 1207894 PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Conductor cross-section: 0.34 mm² Weight: 235 g Protective field height: 660 mm Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 47 /s Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm Scanning range: 0 m ... 6 m Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cascaded: + External device monitoring (EDM): + Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Ambient operating temperature: -20 °C ... +55 °C Restart interlock (delivery status): Deactivated Connection type: Male connector M12, 5-pin Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Typical range: 0 m ... 8 m Safe SICK device communication via EFI/SDL: - Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Resolution: 24 mm Connection type extension connection: Female connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Protection class: III (EN 61140) Synchronization: Optical, without separate synchronization Display elements: LEDs Automatic beam coding: + Ripple: ≤ 10 % Housing material: Aluminum alloy ALMGSI 0.5 Beam coding: + Maximum demand rate: 28 /min (EN ISO 13849) Restart interlock: + Storage temperature: -25 °C ... +70 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching current: 300 mA Power consumption: ≤ 3 A Category: Category 2 (EN ISO 13849) Configuration method: Hard wired Permitted cable length: ≤ 20 m Response time: ≤ 13 ms Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Switching voltage LOW: 2 V DC