C2MT-06024BBC04FE0

Specification: Part Number 1207893 Test rate (internal test): 47 /s Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Display elements: LEDs Automatic beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Storage temperature: -25 °C ... +70 °C Switching voltage LOW: 2 V DC Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Cable length: 700 mm Connection type: Male connector M12, 5-pin Response time: ≤ 13 ms Protective field height: 600 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safe state in the event of a fault: At least one OSSD is in the OFF state. TM (mission time): 20 a (EN ISO 13849) Configuration method: Hard wired External device monitoring (EDM): + Air humidity: 15 % ... 95 %, non-condensing Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) Weight: 215 g Scanning range: 0 m ... 6 m Conductor cross-section: 0.34 mm² Synchronization: Optical, without separate synchronization Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Connection type extension connection: Female connector M12, 5-pin Cascaded: + Type: Type 2 (IEC 61496) Restart interlock: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Housing cross-section (incl. system connection): 15 mm x 32 mm Maximum demand rate: 28 /min (EN ISO 13849) Resolution: 24 mm Beam coding: + Typical range: 0 m ... 8 m Protection class: III (EN 61140) Permitted cable length: ≤ 20 m External device monitoring (delivery status): Deactivated Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Power consumption: ≤ 3 A Restart interlock (delivery status): Deactivated Ripple: ≤ 10 % Housing material: Aluminum alloy ALMGSI 0.5 Switching current: 300 mA Shock resistance: 10 g, 16 ms (EN 60068-2-27)