C2MT-04834BBC04DE0

Specification: Part Number 1207910 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Weight: 175 g Protection class: III (EN 61140) Automatic beam coding: + Connection type: Male connector M12, 5-pin Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) External device monitoring (EDM): + Protective field height: 480 mm Switching voltage LOW: 2 V DC Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Ripple: ≤ 10 % Power consumption: ≤ 3 A Synchronization: Optical, without separate synchronization Housing material: Aluminum alloy ALMGSI 0.5 Cascaded: + Beam coding: + Type: Type 2 (IEC 61496) Safe SICK device communication via EFI/SDL: - Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock: + Switching current: 300 mA Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Category: Category 2 (EN ISO 13849) Permitted cable length: ≤ 20 m Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Configuration method: Hard wired Connection type extension connection: Female connector M12, 5-pin External device monitoring (delivery status): Deactivated Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 34 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Storage temperature: -25 °C ... +70 °C Maximum demand rate: 28 /min (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Display elements: LEDs Typical range: 0 m ... 8 m Test rate (internal test): 47 /s Enclosure rating: IP 65 (EN 60529) Conductor cross-section: 0.34 mm² Scanning range: 0 m ... 6 m Cable length: 350 mm Ambient operating temperature: -20 °C ... +55 °C Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored TM (mission time): 20 a (EN ISO 13849) Restart interlock (delivery status): Deactivated Response time: ≤ 13 ms Air humidity: 15 % ... 95 %, non-condensing