C2MT-03034BBC03DB0

Specification: Part Number 1207964 Switching voltage LOW: 2 V DC External device monitoring (EDM): + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Storage temperature: -25 °C ... +70 °C Housing cross-section (incl. system connection): 15 mm x 32 mm Synchronization: Optical, without separate synchronization PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Restart interlock (delivery status): Deactivated Air humidity: 15 % ... 95 %, non-condensing Resolution: 34 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Response time: ≤ 13 ms Power consumption: ≤ 3 A Permitted cable length: ≤ 20 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protection class: III (EN 61140) Connection type: Male connector M12, 5-pin Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (delivery status): Deactivated Type: Type 2 (IEC 61496) Maximum demand rate: 34 /min (EN ISO 13849) Protective field height: 300 mm Safe SICK device communication via EFI/SDL: - TM (mission time): 20 a (EN ISO 13849) Ripple: ≤ 10 % Automatic beam coding: + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Category: Category 2 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching current: 300 mA Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cascaded: - Scanning range: 0 m ... 6 m Cable length: 350 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock: + Test rate (internal test): 58 /s Configuration method: Hard wired Beam coding: + Enclosure rating: IP 65 (EN 60529) Display elements: LEDs Housing material: Aluminum alloy ALMGSI 0.5 Ambient operating temperature: -20 °C ... +55 °C Typical range: 0 m ... 8 m Weight: 115 g