C2MT-01824BBC04BE0

Specification: Part Number 1207886 Cascaded: + Restart interlock (delivery status): Deactivated Configuration method: Hard wired Resolution: 24 mm PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Protective field height: 180 mm Typical range: 0 m ... 8 m Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Type: Type 2 (IEC 61496) Automatic beam coding: + External device monitoring (delivery status): Deactivated Restart interlock: + Storage temperature: -25 °C ... +70 °C Conductor cross-section: 0.34 mm² Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Connection type extension connection: Female connector M12, 5-pin External device monitoring (EDM): + Permitted cable length: ≤ 20 m Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Category: Category 2 (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Enclosure rating: IP 65 (EN 60529) Safe SICK device communication via EFI/SDL: - Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing cross-section (incl. system connection): 15 mm x 32 mm Cable length: 160 mm Power consumption: ≤ 3 A Display elements: LEDs Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Synchronization: Optical, without separate synchronization Test rate (internal test): 47 /s Weight: 75 g Protection class: III (EN 61140) Connection type: Male connector M12, 5-pin Scanning range: 0 m ... 6 m TM (mission time): 20 a (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage LOW: 2 V DC Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching current: 300 mA Ripple: ≤ 10 % Ambient operating temperature: -20 °C ... +55 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Response time: ≤ 13 ms Beam coding: +