C2MT-01224BBC03BB0

Specification: Part Number 1207942 Ripple: ≤ 10 % Configuration method: Hard wired Automatic beam coding: + Category: Category 2 (EN ISO 13849) External device monitoring (EDM): + Beam coding: + Protection class: III (EN 61140) Permitted cable length: ≤ 20 m Ambient operating temperature: -20 °C ... +55 °C Cascaded: - Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching current: 300 mA Test rate (internal test): 58 /s Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Air humidity: 15 % ... 95 %, non-condensing Conductor cross-section: 0.34 mm² Enclosure rating: IP 65 (EN 60529) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Power consumption: ≤ 3 A Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock (delivery status): Deactivated Storage temperature: -25 °C ... +70 °C Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cable length: 160 mm Safe SICK device communication via EFI/SDL: - PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Protective field height: 120 mm Response time: ≤ 13 ms Switching voltage LOW: 2 V DC Maximum demand rate: 34 /min (EN ISO 13849) Synchronization: Optical, without separate synchronization TM (mission time): 20 a (EN ISO 13849) Resolution: 24 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Restart interlock: + Type: Type 2 (IEC 61496) Weight: 50 g External device monitoring (delivery status): Deactivated Scanning range: 0 m ... 6 m Connection type: Male connector M12, 5-pin Housing cross-section (incl. system connection): 15 mm x 32 mm Display elements: LEDs Safe state in the event of a fault: At least one OSSD is in the OFF state. Typical range: 0 m ... 8 m