C2MT-01824BBC03BB0

Specification: Part Number 1207943 PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Type: Type 2 (IEC 61496) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Cable length: 160 mm Safe SICK device communication via EFI/SDL: - Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms External device monitoring (EDM): + Weight: 75 g Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Display elements: LEDs Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Scanning range: 0 m ... 6 m Beam coding: + Ambient operating temperature: -20 °C ... +55 °C Conductor cross-section: 0.34 mm² Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Safe state in the event of a fault: At least one OSSD is in the OFF state. Ripple: ≤ 10 % Maximum demand rate: 34 /min (EN ISO 13849) Synchronization: Optical, without separate synchronization Storage temperature: -25 °C ... +70 °C Test rate (internal test): 58 /s Power consumption: ≤ 3 A Category: Category 2 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) External device monitoring (delivery status): Deactivated Switching current: 300 mA Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock: + Resolution: 24 mm Configuration method: Hard wired Automatic beam coding: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protection class: III (EN 61140) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Protective field height: 180 mm Typical range: 0 m ... 8 m Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics!