C2MT-02424BBC04DE0

Specification: Part Number 1207887 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Ripple: ≤ 10 % Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm Air humidity: 15 % ... 95 %, non-condensing Resolution: 24 mm Synchronization: Optical, without separate synchronization Restart interlock: + Conductor cross-section: 0.34 mm² Cascaded: + Ambient operating temperature: -20 °C ... +55 °C Typical range: 0 m ... 8 m External device monitoring (delivery status): Deactivated Protective field height: 240 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Cable length: 350 mm Scanning range: 0 m ... 6 m Connection type: Male connector M12, 5-pin External device monitoring (EDM): + Safe SICK device communication via EFI/SDL: - Test rate (internal test): 47 /s Storage temperature: -25 °C ... +70 °C Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms Automatic beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock (delivery status): Deactivated Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Connection type extension connection: Female connector M12, 5-pin Configuration method: Hard wired Shock resistance: 10 g, 16 ms (EN 60068-2-27) Switching current: 300 mA TM (mission time): 20 a (EN ISO 13849) Weight: 95 g Maximum demand rate: 28 /min (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Protection class: III (EN 61140) Category: Category 2 (EN ISO 13849) Display elements: LEDs Beam coding: + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A Permitted cable length: ≤ 20 m