C2MT-04824BBC04DE0

Specification: Part Number 1207891 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Protection class: III (EN 61140) Typical range: 0 m ... 8 m Switching voltage LOW: 2 V DC Housing cross-section (incl. system connection): 15 mm x 32 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Power consumption: ≤ 3 A Display elements: LEDs Ripple: ≤ 10 % Conductor cross-section: 0.34 mm² Response time: ≤ 13 ms Connection type extension connection: Female connector M12, 5-pin Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Configuration method: Hard wired Automatic beam coding: + Switching current: 300 mA TM (mission time): 20 a (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Ambient operating temperature: -20 °C ... +55 °C Protective field height: 480 mm Enclosure rating: IP 65 (EN 60529) Safe state in the event of a fault: At least one OSSD is in the OFF state. PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Permitted cable length: ≤ 20 m Cable length: 350 mm Connection type: Male connector M12, 5-pin Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Cascaded: + Test rate (internal test): 47 /s Category: Category 2 (EN ISO 13849) Restart interlock: + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Resolution: 24 mm External device monitoring (delivery status): Deactivated Type: Type 2 (IEC 61496) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safe SICK device communication via EFI/SDL: - Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Housing material: Aluminum alloy ALMGSI 0.5 Scanning range: 0 m ... 6 m Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Maximum demand rate: 28 /min (EN ISO 13849) Restart interlock (delivery status): Deactivated Synchronization: Optical, without separate synchronization Beam coding: + Weight: 175 g