C2MT-06024BBC03FB0

Specification: Part Number 1207950 Category: Category 2 (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Protection class: III (EN 61140) Resolution: 24 mm Switching voltage LOW: 2 V DC Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Response time: ≤ 13 ms Power consumption: ≤ 3 A Housing material: Aluminum alloy ALMGSI 0.5 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Enclosure rating: IP 65 (EN 60529) Ambient operating temperature: -20 °C ... +55 °C Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (EDM): + Conductor cross-section: 0.34 mm² Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Maximum demand rate: 34 /min (EN ISO 13849) Restart interlock (delivery status): Deactivated Restart interlock: + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Switching current: 300 mA Ripple: ≤ 10 % Safe SICK device communication via EFI/SDL: - Synchronization: Optical, without separate synchronization Connection type: Male connector M12, 5-pin External device monitoring (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Test rate (internal test): 58 /s Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Automatic beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Configuration method: Hard wired Weight: 215 g Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm Scanning range: 0 m ... 6 m Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) TM (mission time): 20 a (EN ISO 13849) Protective field height: 600 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Beam coding: + Cable length: 700 mm Typical range: 0 m ... 8 m Display elements: LEDs