C2MT-05424BBC04DE0

Specification: Part Number 1207892 Conductor cross-section: 0.34 mm² Response time: ≤ 13 ms Synchronization: Optical, without separate synchronization Restart interlock: + Configuration method: Hard wired TM (mission time): 20 a (EN ISO 13849) Connection type extension connection: Female connector M12, 5-pin Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safe state in the event of a fault: At least one OSSD is in the OFF state. Connection type: Male connector M12, 5-pin Switching current: 300 mA Resolution: 24 mm Safe SICK device communication via EFI/SDL: - Cable length: 350 mm Ripple: ≤ 10 % Cascaded: + Automatic beam coding: + Ambient operating temperature: -20 °C ... +55 °C Typical range: 0 m ... 8 m Protection class: III (EN 61140) Switching voltage LOW: 2 V DC Weight: 195 g Air humidity: 15 % ... 95 %, non-condensing Protective field height: 540 mm Restart interlock (delivery status): Deactivated External device monitoring (EDM): + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Power consumption: ≤ 3 A Type: Type 2 (IEC 61496) Display elements: LEDs Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Housing material: Aluminum alloy ALMGSI 0.5 Scanning range: 0 m ... 6 m Housing cross-section (incl. system connection): 15 mm x 32 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Category: Category 2 (EN ISO 13849) Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Permitted cable length: ≤ 20 m Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Storage temperature: -25 °C ... +70 °C Beam coding: + Test rate (internal test): 47 /s Maximum demand rate: 28 /min (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET