C2MT-04224BBC04DE0

Specification: Part Number 1207890 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Type: Type 2 (IEC 61496) Safe state in the event of a fault: At least one OSSD is in the OFF state. Cascaded: + Category: Category 2 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C TM (mission time): 20 a (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Conductor cross-section: 0.34 mm² Protection class: III (EN 61140) Response time: ≤ 13 ms Safe SICK device communication via EFI/SDL: - Restart interlock (delivery status): Deactivated Connection type: Male connector M12, 5-pin Display elements: LEDs Shock resistance: 10 g, 16 ms (EN 60068-2-27) Housing cross-section (incl. system connection): 15 mm x 32 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Enclosure rating: IP 65 (EN 60529) Beam coding: + Ripple: ≤ 10 % Restart interlock: + Power consumption: ≤ 3 A External device monitoring (EDM): + Automatic beam coding: + Connection type extension connection: Female connector M12, 5-pin Test rate (internal test): 47 /s Housing material: Aluminum alloy ALMGSI 0.5 Switching current: 300 mA Protective field height: 420 mm Permitted cable length: ≤ 20 m Synchronization: Optical, without separate synchronization Cable length: 350 mm Storage temperature: -25 °C ... +70 °C Resolution: 24 mm PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Weight: 155 g Scanning range: 0 m ... 6 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Maximum demand rate: 28 /min (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Configuration method: Hard wired Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Typical range: 0 m ... 8 m Switching voltage LOW: 2 V DC External device monitoring (delivery status): Deactivated