C2MT-04224BBC03DB0

Specification: Part Number 1207947 Protective field height: 420 mm Display elements: LEDs Housing material: Aluminum alloy ALMGSI 0.5 Enclosure rating: IP 65 (EN 60529) Connection type: Male connector M12, 5-pin Ripple: ≤ 10 % Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Storage temperature: -25 °C ... +70 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Weight: 155 g Switching current: 300 mA Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Configuration method: Hard wired Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Automatic beam coding: + Type: Type 2 (IEC 61496) Synchronization: Optical, without separate synchronization Maximum demand rate: 34 /min (EN ISO 13849) Protection class: III (EN 61140) Cable length: 350 mm Category: Category 2 (EN ISO 13849) Switching voltage LOW: 2 V DC External device monitoring (delivery status): Deactivated Air humidity: 15 % ... 95 %, non-condensing Ambient operating temperature: -20 °C ... +55 °C Conductor cross-section: 0.34 mm² Power consumption: ≤ 3 A Housing cross-section (incl. system connection): 15 mm x 32 mm Scanning range: 0 m ... 6 m Restart interlock: + Resolution: 24 mm PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Permitted cable length: ≤ 20 m External device monitoring (EDM): + Test rate (internal test): 58 /s TM (mission time): 20 a (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Typical range: 0 m ... 8 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Restart interlock (delivery status): Deactivated Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Cascaded: - Beam coding: + Response time: ≤ 13 ms Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET