C2MT-06034BBC03FB0

Specification: Part Number 1207969 External device monitoring (delivery status): Deactivated Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Beam coding: + Protective field height: 600 mm Connection type: Male connector M12, 5-pin Cascaded: - Weight: 215 g Enclosure rating: IP 65 (EN 60529) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock: + Conductor cross-section: 0.34 mm² Scanning range: 0 m ... 6 m Restart interlock (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Housing cross-section (incl. system connection): 15 mm x 32 mm Permitted cable length: ≤ 20 m External device monitoring (EDM): + Cable length: 700 mm Power consumption: ≤ 3 A Maximum demand rate: 34 /min (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Air humidity: 15 % ... 95 %, non-condensing Switching voltage LOW: 2 V DC Safe state in the event of a fault: At least one OSSD is in the OFF state. Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Storage temperature: -25 °C ... +70 °C Configuration method: Hard wired Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Typical range: 0 m ... 8 m Category: Category 2 (EN ISO 13849) Resolution: 34 mm Synchronization: Optical, without separate synchronization Type: Type 2 (IEC 61496) Ripple: ≤ 10 % Switching current: 300 mA Response time: ≤ 13 ms Safe SICK device communication via EFI/SDL: - Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Test rate (internal test): 58 /s Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Display elements: LEDs Automatic beam coding: + TM (mission time): 20 a (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Protection class: III (EN 61140)