C2MT-06634BBC04FE0

Specification: Part Number 1207913 Conductor cross-section: 0.34 mm² Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Safe SICK device communication via EFI/SDL: - Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Beam coding: + Cascaded: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safe state in the event of a fault: At least one OSSD is in the OFF state. Test rate (internal test): 47 /s Type: Type 2 (IEC 61496) Ripple: ≤ 10 % Restart interlock: + Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Protective field height: 660 mm Protection class: III (EN 61140) Cable length: 700 mm Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Weight: 235 g Typical range: 0 m ... 8 m Switching current: 300 mA Display elements: LEDs Housing material: Aluminum alloy ALMGSI 0.5 Ambient operating temperature: -20 °C ... +55 °C PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Category: Category 2 (EN ISO 13849) Synchronization: Optical, without separate synchronization Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Restart interlock (delivery status): Deactivated Resolution: 34 mm Power consumption: ≤ 3 A Connection type extension connection: Female connector M12, 5-pin Switching voltage LOW: 2 V DC Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Automatic beam coding: + External device monitoring (EDM): + Housing cross-section (incl. system connection): 15 mm x 32 mm Permitted cable length: ≤ 20 m Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Maximum demand rate: 28 /min (EN ISO 13849) Response time: ≤ 13 ms Configuration method: Hard wired Air humidity: 15 % ... 95 %, non-condensing