C2MT-07824BBC03FB0

Specification: Part Number 1207953 Conductor cross-section: 0.34 mm² Safe state in the event of a fault: At least one OSSD is in the OFF state. Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Scanning range: 0 m ... 6 m External device monitoring (EDM): + Typical range: 0 m ... 8 m Housing material: Aluminum alloy ALMGSI 0.5 Ripple: ≤ 10 % Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Type: Type 2 (IEC 61496) Air humidity: 15 % ... 95 %, non-condensing Restart interlock: + Configuration method: Hard wired Connection type: Male connector M12, 5-pin Display elements: LEDs Maximum demand rate: 34 /min (EN ISO 13849) Power consumption: ≤ 3 A Test rate (internal test): 58 /s Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing cross-section (incl. system connection): 15 mm x 32 mm Beam coding: + Ambient operating temperature: -20 °C ... +55 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Restart interlock (delivery status): Deactivated Switching current: 300 mA Permitted cable length: ≤ 20 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Storage temperature: -25 °C ... +70 °C Weight: 280 g Enclosure rating: IP 65 (EN 60529) Switching voltage LOW: 2 V DC Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET External device monitoring (delivery status): Deactivated Protective field height: 780 mm TM (mission time): 20 a (EN ISO 13849) Resolution: 24 mm Cascaded: - Automatic beam coding: + Protection class: III (EN 61140) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cable length: 700 mm Synchronization: Optical, without separate synchronization PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Response time: ≤ 13 ms Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics!