C2MT-08424BBC03FB0

Specification: Part Number 1207954 TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Typical range: 0 m ... 8 m Beam coding: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Resolution: 24 mm Restart interlock (delivery status): Deactivated Synchronization: Optical, without separate synchronization Power consumption: ≤ 3 A Shock resistance: 10 g, 16 ms (EN 60068-2-27) Restart interlock: + Cable length: 700 mm Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs Cascaded: - Switching voltage LOW: 2 V DC Enclosure rating: IP 65 (EN 60529) Category: Category 2 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Protection class: III (EN 61140) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Test rate (internal test): 58 /s Weight: 300 g External device monitoring (delivery status): Deactivated Maximum demand rate: 34 /min (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Protective field height: 840 mm Configuration method: Hard wired Switching current: 300 mA Housing cross-section (incl. system connection): 15 mm x 32 mm Response time: ≤ 13 ms Air humidity: 15 % ... 95 %, non-condensing Ripple: ≤ 10 % Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Type: Type 2 (IEC 61496) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Automatic beam coding: + External device monitoring (EDM): + Housing material: Aluminum alloy ALMGSI 0.5 Storage temperature: -25 °C ... +70 °C Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Scanning range: 0 m ... 6 m