C2MT-08424BBC04FE0

Specification: Part Number 1207897 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Category: Category 2 (EN ISO 13849) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Typical range: 0 m ... 8 m Switching current: 300 mA Protective field height: 840 mm Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Display elements: LEDs Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Connection type extension connection: Female connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Test rate (internal test): 47 /s Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Ambient operating temperature: -20 °C ... +55 °C Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Scanning range: 0 m ... 6 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cable length: 700 mm Beam coding: + Automatic beam coding: + Synchronization: Optical, without separate synchronization Power consumption: ≤ 3 A Type: Type 2 (IEC 61496) Restart interlock: + Safe SICK device communication via EFI/SDL: - Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Air humidity: 15 % ... 95 %, non-condensing Connection type: Male connector M12, 5-pin Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Ripple: ≤ 10 % Cascaded: + TM (mission time): 20 a (EN ISO 13849) Weight: 300 g Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Response time: ≤ 13 ms Configuration method: Hard wired Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage LOW: 2 V DC Protection class: III (EN 61140) Housing material: Aluminum alloy ALMGSI 0.5 Housing cross-section (incl. system connection): 15 mm x 32 mm Conductor cross-section: 0.34 mm² Resolution: 24 mm