C2MT-09614BBC03FB0

Specification: Part Number 1207937 Cable length: 700 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Resolution: 14 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Safe SICK device communication via EFI/SDL: - Power consumption: ≤ 3 A Housing material: Aluminum alloy ALMGSI 0.5 Scanning range: 0 m ... 6 m Cascaded: - Switching current: 300 mA Housing cross-section (incl. system connection): 15 mm x 32 mm Storage temperature: -25 °C ... +70 °C Air humidity: 15 % ... 95 %, non-condensing Restart interlock: + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type: Type 2 (IEC 61496) Ripple: ≤ 10 % Configuration method: Hard wired Weight: 340 g Permitted cable length: ≤ 20 m Response time: ≤ 17 ms Synchronization: Optical, without separate synchronization Enclosure rating: IP 65 (EN 60529) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Category: Category 2 (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Automatic beam coding: + Protection class: III (EN 61140) Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs External device monitoring (delivery status): Deactivated Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Typical range: 0 m ... 8 m Protective field height: 960 mm Conductor cross-section: 0.34 mm² Connection type: Male connector M12, 5-pin Safe state in the event of a fault: At least one OSSD is in the OFF state. Maximum demand rate: 34 /min (EN ISO 13849) Test rate (internal test): 58 /s