C2MT-09634BBC03FB0

Specification: Part Number 1207975 Power consumption: ≤ 3 A External device monitoring (delivery status): Deactivated Switching current: 300 mA Enclosure rating: IP 65 (EN 60529) Resolution: 34 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Weight: 340 g External device monitoring (EDM): + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Configuration method: Hard wired Cable length: 700 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Connection type: Male connector M12, 5-pin Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cascaded: - Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Protective field height: 960 mm Category: Category 2 (EN ISO 13849) Conductor cross-section: 0.34 mm² Display elements: LEDs Safe state in the event of a fault: At least one OSSD is in the OFF state. Automatic beam coding: + Type: Type 2 (IEC 61496) Ripple: ≤ 10 % Maximum demand rate: 34 /min (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Protection class: III (EN 61140) Housing cross-section (incl. system connection): 15 mm x 32 mm Housing material: Aluminum alloy ALMGSI 0.5 Beam coding: + Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Restart interlock: + Air humidity: 15 % ... 95 %, non-condensing Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Permitted cable length: ≤ 20 m Response time: ≤ 13 ms Safe SICK device communication via EFI/SDL: - Ambient operating temperature: -20 °C ... +55 °C Typical range: 0 m ... 8 m TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Synchronization: Optical, without separate synchronization Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC