C2MT-09624BBC03FB0

Specification: Part Number 1207956 Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Permitted cable length: ≤ 20 m Cascaded: - External device monitoring (EDM): + Typical range: 0 m ... 8 m Configuration method: Hard wired Housing cross-section (incl. system connection): 15 mm x 32 mm TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Switching current: 300 mA Test rate (internal test): 58 /s Display elements: LEDs PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Power consumption: ≤ 3 A Weight: 340 g Protection class: III (EN 61140) Automatic beam coding: + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Synchronization: Optical, without separate synchronization Maximum demand rate: 34 /min (EN ISO 13849) Scanning range: 0 m ... 6 m Category: Category 2 (EN ISO 13849) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Protective field height: 960 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Response time: ≤ 13 ms Ripple: ≤ 10 % Restart interlock (delivery status): Deactivated Air humidity: 15 % ... 95 %, non-condensing Restart interlock: + Type: Type 2 (IEC 61496) Resolution: 24 mm Housing material: Aluminum alloy ALMGSI 0.5 Safe SICK device communication via EFI/SDL: - Conductor cross-section: 0.34 mm² Switching voltage LOW: 2 V DC Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Storage temperature: -25 °C ... +70 °C Ambient operating temperature: -20 °C ... +55 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Connection type: Male connector M12, 5-pin