C2MT-10214BBC04FE0

Specification: Part Number 1207881 Type: Type 2 (IEC 61496) Power consumption: ≤ 3 A Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Typical range: 0 m ... 8 m Restart interlock (delivery status): Deactivated Resolution: 14 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Automatic beam coding: + Housing material: Aluminum alloy ALMGSI 0.5 Connection type: Male connector M12, 5-pin Response time: ≤ 17 ms Connection type extension connection: Female connector M12, 5-pin Category: Category 2 (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Weight: 360 g Test rate (internal test): 47 /s External device monitoring (delivery status): Deactivated Storage temperature: -25 °C ... +70 °C PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Ripple: ≤ 10 % TM (mission time): 20 a (EN ISO 13849) Permitted cable length: ≤ 20 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (EDM): + Scanning range: 0 m ... 6 m Cascaded: + Restart interlock: + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Configuration method: Hard wired Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Protective field height: 1,020 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Beam coding: + Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) Switching voltage LOW: 2 V DC Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Protection class: III (EN 61140) Safe SICK device communication via EFI/SDL: - Air humidity: 15 % ... 95 %, non-condensing Display elements: LEDs Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Switching current: 300 mA Shock resistance: 10 g, 16 ms (EN 60068-2-27) Synchronization: Optical, without separate synchronization Conductor cross-section: 0.34 mm²