C2MT-09624BBC04FE0

Specification: Part Number 1207899 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! External device monitoring (delivery status): Deactivated Resolution: 24 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Scanning range: 0 m ... 6 m Synchronization: Optical, without separate synchronization Automatic beam coding: + Housing material: Aluminum alloy ALMGSI 0.5 TM (mission time): 20 a (EN ISO 13849) Cascaded: + Type: Type 2 (IEC 61496) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Response time: ≤ 13 ms Switching current: 300 mA Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) Display elements: LEDs Cable length: 700 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Connection type: Male connector M12, 5-pin Configuration method: Hard wired Protective field height: 960 mm Category: Category 2 (EN ISO 13849) Beam coding: + Weight: 340 g Safe SICK device communication via EFI/SDL: - Switching voltage LOW: 2 V DC Housing cross-section (incl. system connection): 15 mm x 32 mm Test rate (internal test): 47 /s Maximum demand rate: 28 /min (EN ISO 13849) External device monitoring (EDM): + Protection class: III (EN 61140) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Restart interlock (delivery status): Deactivated Power consumption: ≤ 3 A Ripple: ≤ 10 % Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Typical range: 0 m ... 8 m Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Storage temperature: -25 °C ... +70 °C Restart interlock: + PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Air humidity: 15 % ... 95 %, non-condensing Connection type extension connection: Female connector M12, 5-pin