C2MT-09634BBC04FE0

Specification: Part Number 1207918 Connection type: Male connector M12, 5-pin Power consumption: ≤ 3 A Safe SICK device communication via EFI/SDL: - Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Beam coding: + Cable length: 700 mm External device monitoring (EDM): + Protection class: III (EN 61140) Ambient operating temperature: -20 °C ... +55 °C Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cascaded: + External device monitoring (delivery status): Deactivated Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock (delivery status): Deactivated Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Type: Type 2 (IEC 61496) Air humidity: 15 % ... 95 %, non-condensing Connection type extension connection: Female connector M12, 5-pin Configuration method: Hard wired Shock resistance: 10 g, 16 ms (EN 60068-2-27) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Synchronization: Optical, without separate synchronization Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing material: Aluminum alloy ALMGSI 0.5 Safe state in the event of a fault: At least one OSSD is in the OFF state. Weight: 340 g Typical range: 0 m ... 8 m Switching voltage LOW: 2 V DC Switching current: 300 mA Display elements: LEDs Scanning range: 0 m ... 6 m Permitted cable length: ≤ 20 m Response time: ≤ 13 ms Storage temperature: -25 °C ... +70 °C Restart interlock: + Enclosure rating: IP 65 (EN 60529) Ripple: ≤ 10 % Protective field height: 960 mm Test rate (internal test): 47 /s Automatic beam coding: + Conductor cross-section: 0.34 mm² Resolution: 34 mm PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) TM (mission time): 20 a (EN ISO 13849) Category: Category 2 (EN ISO 13849)