C2MT-10224BBC04FE0

Specification: Part Number 1207900 Enclosure rating: IP 65 (EN 60529) Scanning range: 0 m ... 6 m Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Category: Category 2 (EN ISO 13849) Restart interlock: + PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Synchronization: Optical, without separate synchronization Ambient operating temperature: -20 °C ... +55 °C Response time: ≤ 13 ms Ripple: ≤ 10 % External device monitoring (delivery status): Deactivated Safe SICK device communication via EFI/SDL: - Restart interlock (delivery status): Deactivated External device monitoring (EDM): + TM (mission time): 20 a (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Resolution: 24 mm Configuration method: Hard wired Display elements: LEDs Permitted cable length: ≤ 20 m Power consumption: ≤ 3 A Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Test rate (internal test): 47 /s Beam coding: + Type: Type 2 (IEC 61496) Connection type extension connection: Female connector M12, 5-pin Typical range: 0 m ... 8 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Air humidity: 15 % ... 95 %, non-condensing Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Shock resistance: 10 g, 16 ms (EN 60068-2-27) Weight: 360 g Conductor cross-section: 0.34 mm² Switching voltage LOW: 2 V DC Housing cross-section (incl. system connection): 15 mm x 32 mm Protective field height: 1,020 mm Connection type: Male connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Protection class: III (EN 61140) Housing material: Aluminum alloy ALMGSI 0.5 Switching current: 300 mA Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Cable length: 700 mm Automatic beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cascaded: +