C2MT-09614BBC04FE0

Specification: Part Number 1207880 External device monitoring (delivery status): Deactivated Air humidity: 15 % ... 95 %, non-condensing Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock (delivery status): Deactivated Protection class: III (EN 61140) Switching voltage LOW: 2 V DC PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Permitted cable length: ≤ 20 m Category: Category 2 (EN ISO 13849) Type: Type 2 (IEC 61496) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safe state in the event of a fault: At least one OSSD is in the OFF state. Cascaded: + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Beam coding: + Synchronization: Optical, without separate synchronization Housing material: Aluminum alloy ALMGSI 0.5 Display elements: LEDs Weight: 340 g Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe SICK device communication via EFI/SDL: - Power consumption: ≤ 3 A Automatic beam coding: + Restart interlock: + Protective field height: 960 mm Cable length: 700 mm Enclosure rating: IP 65 (EN 60529) Conductor cross-section: 0.34 mm² Connection type: Male connector M12, 5-pin Connection type extension connection: Female connector M12, 5-pin Test rate (internal test): 47 /s Ambient operating temperature: -20 °C ... +55 °C Typical range: 0 m ... 8 m TM (mission time): 20 a (EN ISO 13849) Resolution: 14 mm Configuration method: Hard wired Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (EDM): + Maximum demand rate: 28 /min (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Response time: ≤ 17 ms Ripple: ≤ 10 % Storage temperature: -25 °C ... +70 °C Housing cross-section (incl. system connection): 15 mm x 32 mm Scanning range: 0 m ... 6 m Switching current: 300 mA