C2MT-09024BBC03FB0

Specification: Part Number 1207955 TM (mission time): 20 a (EN ISO 13849) Switching current: 300 mA Weight: 320 g Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm External device monitoring (delivery status): Deactivated Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Ambient operating temperature: -20 °C ... +55 °C Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Cascaded: - Housing material: Aluminum alloy ALMGSI 0.5 Configuration method: Hard wired Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Test rate (internal test): 58 /s Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Beam coding: + Safe SICK device communication via EFI/SDL: - Cable length: 700 mm Response time: ≤ 13 ms Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Resolution: 24 mm Switching voltage LOW: 2 V DC Synchronization: Optical, without separate synchronization Conductor cross-section: 0.34 mm² Air humidity: 15 % ... 95 %, non-condensing Protection class: III (EN 61140) Typical range: 0 m ... 8 m Connection type: Male connector M12, 5-pin Category: Category 2 (EN ISO 13849) Display elements: LEDs Enclosure rating: IP 65 (EN 60529) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Automatic beam coding: + Restart interlock: + Restart interlock (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Power consumption: ≤ 3 A Ripple: ≤ 10 % Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Maximum demand rate: 34 /min (EN ISO 13849) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Scanning range: 0 m ... 6 m Protective field height: 900 mm