C2MT-09024BBC04FE0

Specification: Part Number 1207898 Cascaded: + Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Safe SICK device communication via EFI/SDL: - Weight: 320 g Switching voltage LOW: 2 V DC Shock resistance: 10 g, 16 ms (EN 60068-2-27) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Enclosure rating: IP 65 (EN 60529) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Typical range: 0 m ... 8 m Protective field height: 900 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Resolution: 24 mm Restart interlock (delivery status): Deactivated Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Power consumption: ≤ 3 A Test rate (internal test): 47 /s Category: Category 2 (EN ISO 13849) Protection class: III (EN 61140) Type: Type 2 (IEC 61496) Ambient operating temperature: -20 °C ... +55 °C Conductor cross-section: 0.34 mm² Storage temperature: -25 °C ... +70 °C Cable length: 700 mm Display elements: LEDs Configuration method: Hard wired Connection type: Male connector M12, 5-pin Air humidity: 15 % ... 95 %, non-condensing Automatic beam coding: + External device monitoring (delivery status): Deactivated Switching current: 300 mA Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Ripple: ≤ 10 % Permitted cable length: ≤ 20 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Connection type extension connection: Female connector M12, 5-pin Maximum demand rate: 28 /min (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Scanning range: 0 m ... 6 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Response time: ≤ 13 ms Synchronization: Optical, without separate synchronization PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) External device monitoring (EDM): +