C2MT-07224BBC04FE0

Specification: Part Number 1207895 Connection type: Male connector M12, 5-pin Maximum demand rate: 28 /min (EN ISO 13849) Protective field height: 720 mm Resolution: 24 mm Response time: ≤ 13 ms Switching current: 300 mA TM (mission time): 20 a (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 47 /s Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET External device monitoring (delivery status): Deactivated Switching voltage LOW: 2 V DC Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Weight: 255 g Connection type extension connection: Female connector M12, 5-pin Cable length: 700 mm Enclosure rating: IP 65 (EN 60529) Conductor cross-section: 0.34 mm² Ambient operating temperature: -20 °C ... +55 °C Type: Type 2 (IEC 61496) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Housing material: Aluminum alloy ALMGSI 0.5 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Permitted cable length: ≤ 20 m Automatic beam coding: + Power consumption: ≤ 3 A External device monitoring (EDM): + Category: Category 2 (EN ISO 13849) Configuration method: Hard wired Storage temperature: -25 °C ... +70 °C Cascaded: + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Typical range: 0 m ... 8 m Restart interlock: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Synchronization: Optical, without separate synchronization Ripple: ≤ 10 % Display elements: LEDs Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Safe state in the event of a fault: At least one OSSD is in the OFF state. Scanning range: 0 m ... 6 m Protection class: III (EN 61140) Beam coding: + Restart interlock (delivery status): Deactivated Safe SICK device communication via EFI/SDL: -