Specification: Part Number 1207950 Category: Category 2 (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Protection class: III (EN 61140) Resolution: 24 mm Switching voltage LOW: 2 V DC Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Response time: ≤ 13 ms Power consumption: ≤ 3 A Housing material: Aluminum alloy ALMGSI 0.5 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC)
Specification: Part Number 1207893 Test rate (internal test): 47 /s Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Display elements: LEDs Automatic beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Storage temperature: -25 °C ... +70 °C Switching voltage LOW: 2 V DC Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored
Specification: Part Number 1207969 External device monitoring (delivery status): Deactivated Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Beam coding: + Protective field height: 600 mm Connection type: Male connector M12, 5-pin Cascaded: - Weight: 215 g Enclosure rating: IP 65 (EN 60529) Type of output: PNP semiconductors, short-circuit protecte
Specification: Part Number 1207932 Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Ripple: ≤ 10 % Weight: 235 g Restart interlock: + Beam coding: + Resolution: 14 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Safe SICK device communication via EFI/SDL: - Cascaded: - Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) External device monit
Specification: Part Number 1207951 Conductor cross-section: 0.34 mm² Switching current: 300 mA Air humidity: 15 % ... 95 %, non-condensing Type: Type 2 (IEC 61496) Category: Category 2 (EN ISO 13849) Test rate (internal test): 58 /s Synchronization: Optical, without separate synchronization Safe SICK device communication via EFI/SDL: - Cascaded: - Connection type: Male connector M12, 5-pin Supply v
Specification: Part Number 1207894 PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Conductor cross-section: 0.34 mm² Weight: 235 g Protective field height: 660 mm Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 47 /s Type: Type 2 (IEC 61496) Housing cross-section (incl. system conn
Specification: Part Number 1207913 Conductor cross-section: 0.34 mm² Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Safe SICK device communication via EFI/SDL: - Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Beam coding: + Cas
Specification: Part Number 1207895 Connection type: Male connector M12, 5-pin Maximum demand rate: 28 /min (EN ISO 13849) Protective field height: 720 mm Resolution: 24 mm Response time: ≤ 13 ms Switching current: 300 mA TM (mission time): 20 a (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 47 /s
Specification: Part Number 1207914 Ripple: ≤ 10 % Response time: ≤ 13 ms Air humidity: 15 % ... 95 %, non-condensing Restart interlock (delivery status): Deactivated PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Connection type extension connection: Female connector M12, 5-pin Protection class: III (EN 61140) Protective field height: 720 mm Switching voltage LOW: 2 V DC Connection type: M
Specification: Part Number 1207953 Conductor cross-section: 0.34 mm² Safe state in the event of a fault: At least one OSSD is in the OFF state. Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Scanning range: 0 m ... 6 m External device monitoring (EDM): + Typical range: 0 m ... 8 m Housing material: Aluminum alloy ALMGSI 0
Specification: Part Number 1207896 Connection type extension connection: Female connector M12, 5-pin Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) External device monitoring (delivery status): Deactivated Power consumption: ≤ 3 A Safe SICK device communication via EFI/SDL: - Cascaded: + Air humidity: 15 % ... 95 %,
Specification: Part Number 1207915 Typical range: 0 m ... 8 m Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Type: Type 2 (IEC 61496) Safe SICK device communication via EFI/SDL: - Air humidity: 15 % ... 95 %, non-condensing Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching current: 300 mA TM (mission time): 20 a (EN ISO 1
Specification: Part Number 1207935 External device monitoring (EDM): + Switching voltage LOW: 2 V DC Beam coding: + Power consumption: ≤ 3 A Restart interlock (delivery status): Deactivated Connection type: Male connector M12, 5-pin TM (mission time): 20 a (EN ISO 13849) Cascaded: - Type: Type 2 (IEC 61496) Test rate (internal test): 58 /s Maximum demand rate: 34 /min (EN ISO 13849) Conduct
Specification: Part Number 1207954 TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Typical range: 0 m ... 8 m Beam coding: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Resolution: 24 mm Restart interlock (delivery status): Deactivated Synchronization: Optical, without
Specification: Part Number 1207840 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Connection type: Male connector M12, 5-pin Beam coding: + Display elements: LEDs Category: Category 2 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Cable length: 700 mm Protection class: III (EN 61140) Type of
Specification: Part Number 1207897 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Category: Category 2 (EN ISO 13849) PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Typical range: 0 m ... 8 m Switching current: 300 mA Protective field height: 840 mm Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Display elements: LEDs Enclosure rating: IP 65 (EN 6052
Specification: Part Number 1207955 TM (mission time): 20 a (EN ISO 13849) Switching current: 300 mA Weight: 320 g Type: Type 2 (IEC 61496) Housing cross-section (incl. system connection): 15 mm x 32 mm External device monitoring (delivery status): Deactivated Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Ambient operating temperature: -20 °C ... +55 °C Switching voltage HIGH: 24 V DC (VS - 2.
Specification: Part Number 1207898 Cascaded: + Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Safe SICK device communication via EFI/SDL: - Weight: 320 g Switching voltage LOW: 2 V DC Shock resistance: 10 g, 16 ms (EN 60068-2-27) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS)
Specification: Part Number 1207937 Cable length: 700 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Resolution: 14 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safety integ
Specification: Part Number 1207880 External device monitoring (delivery status): Deactivated Air humidity: 15 % ... 95 %, non-condensing Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock (delivery status): Deactivated Protection class: III (EN 61140) Switching voltage LOW: 2 V DC PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Permitted cable length: &l
Specification: Part Number 1207956 Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated Permitted cable length: ≤ 20 m Cascaded: - External device monitoring (EDM): + Typical range: 0 m ... 8 m Configuration method: Hard wired Housing cross-section (incl. system connection): 15 mm x 32 mm TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V
Specification: Part Number 1207899 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! External device monitoring (delivery status): Deactivated Resolution: 24 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Scanning range: 0 m
Specification: Part Number 1207975 Power consumption: ≤ 3 A External device monitoring (delivery status): Deactivated Switching current: 300 mA Enclosure rating: IP 65 (EN 60529) Resolution: 34 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Weight: 340 g External device monitoring (EDM): + PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Configuration method: Hard wired Cable length: 700
Specification: Part Number 1207918 Connection type: Male connector M12, 5-pin Power consumption: ≤ 3 A Safe SICK device communication via EFI/SDL: - Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Beam coding: + Cable length: 700 mm External device monitoring (EDM): + Protection class: III (EN 61140) Ambient operating temperature: -20 °C ... +55 °C Integration via Flexi Soft safety cont
Specification: Part Number 1207881 Type: Type 2 (IEC 61496) Power consumption: ≤ 3 A Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Typical range: 0 m ... 8 m Restart interlock (delivery status): Deactivated Resolution: 14 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Automatic beam coding: + Housing material: Aluminum alloy ALMGSI 0.5 Connection type: Male connector M12, 5-p
Specification: Part Number 1207957 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock: + Power consumption: ≤ 3 A Maximum demand rate: 34 /min (EN ISO 13849) External device monitoring (EDM): + PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Switching voltage LOW: 2 V DC Type: Type 2 (IEC 61496) Safe state in the event of a fault: At least one
Specification: Part Number 1207900 Enclosure rating: IP 65 (EN 60529) Scanning range: 0 m ... 6 m Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Category: Category 2 (EN ISO 13849) Restart interlock: + PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Synchronization: Optical, without separate synchronization Ambient operating temperature: -20 °C ... +55 °C Response time: ≤ 13 ms Ripple: &le
Specification: Part Number 1207958 Configuration method: Hard wired Synchronization: Optical, without separate synchronization Storage temperature: -25 °C ... +70 °C Protective field height: 1,080 mm Resolution: 24 mm Weight: 380 g Scanning range: 0 m ... 6 m Power consumption: ≤ 3 A Shock resistance: 10 g, 16 ms (EN 60068-2-27) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Air humidity:
Specification: Part Number 1207844 Resolution: 24 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Beam coding: + Storage temperature: -25 °C ... +70 °C Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Maximum demand rate: 34 /min (EN ISO 13849)
Specification: Part Number 1207901 TM (mission time): 20 a (EN ISO 13849) Ripple: ≤ 10 % Restart interlock (delivery status): Deactivated Response time: ≤ 13 ms Storage temperature: -25 °C ... +70 °C Enclosure rating: IP 65 (EN 60529) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Switching current: 300 mA Ambient operating temperature: -20 °C ... +55 °C
