Specification: Part Number 1207834 Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m Air humidity: 15 % ... 95 %, non-condensing Enclosure rating: IP 65 (EN 60529) External device monitoring (EDM): + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Resolution: 24 mm Restart interlock (delivery status): Deactivated Protection class: III (EN 61140) Type: Type 2 (IEC 61496) Safety int
Specification: Part Number 1207967 Permitted cable length: ≤ 20 m Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs Test rate (internal test): 58 /s Maximum demand rate: 34 /min (EN ISO 13849) Enclosure rating: IP 65 (EN 60529) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Scanning range: 0 m ... 6 m Safe state in the event of a fault: At least one OSSD is in the OFF state.
Specification: Part Number 1207930 Connection type: Male connector M12, 5-pin Housing material: Aluminum alloy ALMGSI 0.5 Maximum demand rate: 34 /min (EN ISO 13849) Ripple: ≤ 10 % Conductor cross-section: 0.34 mm² Housing cross-section (incl. system connection): 15 mm x 32 mm Storage temperature: -25 °C ... +70 °C Safe SICK device communication via EFI/SDL: - Vibration resistance: 5 g, 10 Hz ... 5
Specification: Part Number 1207800 Protection class: III (EN 61140) Typical range: 0 m ... 8 m Configuration method: Hard wired Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (EDM): + Conductor cross-section: 0.34 mm² Test rate (internal test): 58 /s Protective field height: 540 mm TM (mission time): 20 a (EN ISO 13849) Restart interlock: + Saf
Specification: Part Number 1207873 Enclosure rating: IP 65 (EN 60529) Configuration method: Hard wired Shock resistance: 10 g, 16 ms (EN 60068-2-27) Ripple: ≤ 10 % Cascaded: + Safe SICK device communication via EFI/SDL: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Restart interlock (delivery status): Deactivated Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061)
Specification: Part Number 1207835 Automatic beam coding: + Maximum demand rate: 34 /min (EN ISO 13849) Switching current: 300 mA Power consumption: ≤ 3 A Synchronization: Optical, without separate synchronization Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Restart interlock (delivery status): Deactivated Weight: 195 g Configuration method: Hard wired Beam coding: + Storage temperature:
Specification: Part Number 1207968 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Ambient operating temperature: -20 °C ... +55 °C TM (mission time): 20 a (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Enclosure rating: IP 65 (EN 60529) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Type of output: P
Specification: Part Number 1207854 External device monitoring (EDM): + Test rate (internal test): 58 /s Automatic beam coding: + Synchronization: Optical, without separate synchronization Connection type: Male connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Type: Type 2 (IEC 61496) Resolution: 34 mm Ambient operating temperature: -20 °C ... +55 °C Protection class: III (EN 61140) Max
Specification: Part Number 1207911 Housing cross-section (incl. system connection): 15 mm x 32 mm Automatic beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Restart interlock: + Safe SICK device communication via EFI/SDL: - Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Protection class: III (EN 61140) Ambient operating temperature: -20 °C ... +55 °C Wei
Specification: Part Number 1207931 TM (mission time): 20 a (EN ISO 13849) Type: Type 2 (IEC 61496) Air humidity: 15 % ... 95 %, non-condensing Response time: ≤ 14 ms Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs Test rate (internal test): 58 /s Category: Category 2 (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFI
Specification: Part Number 1207801 Typical range: 0 m ... 8 m Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Ripple: ≤ 10 % External device monitoring (EDM): + TM (mission time): 20 a (EN ISO 13849) Restart interlock: + Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safe S
Specification: Part Number 1207874 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Power consumption: ≤ 3 A Response time: ≤ 14 ms Scanning range: 0 m ... 6 m Test rate (internal test): 47 /s Ambient operating temperature: -20 °C ... +55 °C Safe state in the event of a fault: At least one OSSD is in the OFF state. Type: Type 2 (IEC 61496) Switching current: 300 mA Permitted cable len
Specification: Part Number 1207855 Housing cross-section (incl. system connection): 15 mm x 32 mm Ripple: ≤ 10 % Housing material: Aluminum alloy ALMGSI 0.5 Ambient operating temperature: -20 °C ... +55 °C Resolution: 34 mm Storage temperature: -25 °C ... +70 °C Enclosure rating: IP 65 (EN 60529) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFI
Specification: Part Number 1207912 Protection class: III (EN 61140) Safe SICK device communication via EFI/SDL: - Resolution: 34 mm External device monitoring (EDM): + Switching voltage LOW: 2 V DC Enclosure rating: IP 65 (EN 60529) Connection type: Male connector M12, 5-pin Ambient operating temperature: -20 °C ... +55 °C Connection type extension connection: Female connector M12, 5-pin Type: Type 2
Specification: Part Number 1207802 Category: Category 2 (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Protection class: III (EN 61140) Cable length: 700 mm External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Conductor cross-section: 0.34 mm² Restart interlock (deli
Specification: Part Number 1207875 Cable length: 700 mm Restart interlock (delivery status): Deactivated Power consumption: ≤ 3 A Automatic beam coding: + Protection class: III (EN 61140) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) TM (mission time): 20 a (EN ISO 13849) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Conductor cross-section: 0.34 mm² Protective field height: 660 mm Ca
Specification: Part Number 1207837 Configuration method: Hard wired Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Category: Category 2 (EN ISO 13849) Typical range: 0 m ... 8 m Cascaded: - Permitted cable length: ≤ 20 m Storage temperature: -25 °C ... +70 °C Protection class: III (EN 61140) Housing material: Aluminum alloy ALMGSI 0.5 Response time: ≤ 13 ms Scanning range: 0 m ... 6 m
Specification: Part Number 1207970 Power consumption: ≤ 3 A Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Display elements: LEDs Typical range: 0 m ... 8 m Synchronization: Optical, without separate synchronization Permitted cable length: ≤ 20 m Configuration method: Hard wired Scanning range: 0 m ... 6 m External device monitoring (EDM): + Switching curre
Specification: Part Number 1207856 Cascaded: - Maximum demand rate: 34 /min (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Housing cross-section (incl. system connection): 15 mm x 32 mm Switching current: 300 mA Ripple: ≤ 10 % Beam codin
Specification: Part Number 1207933 Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) TM (mission time): 20 a (EN ISO 13849) Ripple: ≤ 10 % Restart interlock (delivery status): Deactivated Category: Category 2 (EN ISO 13849) Maximum demand rate: 34 /min (EN ISO 13849)
Specification: Part Number 1207803 Weight: 255 g Test rate (internal test): 58 /s Maximum demand rate: 34 /min (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Restart interlock (delivery status): Deactivated PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Resolution: 14 mm Switching current: 300 mA Switching voltage LOW: 2 V DC Beam coding: + Shock resistance: 10 g, 16 ms (EN 60068-2-
Specification: Part Number 1207876 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing material: Aluminum alloy ALMGSI 0.5 Type: Type 2 (IEC 61496) Resolution: 14 mm Test rate (internal test): 47 /s Connection type extension connection: Female connector M12, 5-pin Air humidity: 15 % ... 95 %, non-condensing Protection class: III (EN 61140) Scanning range: 0 m ... 6
Specification: Part Number 1207952 Weight: 255 g Resolution: 24 mm Protective field height: 720 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored External device monitoring (EDM): + Safe SICK device communication via EFI/SDL: - Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cascaded: - Maximum demand rate: 34 /min (EN ISO 13849)
Specification: Part Number 1207838 Safe state in the event of a fault: At least one OSSD is in the OFF state. Cable length: 700 mm TM (mission time): 20 a (EN ISO 13849) Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Category: Category 2 (EN ISO 13849) PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Conductor cross-section: 0.34 mm² Restart interlock: + Shock resistance: 10 g, 16 ms (EN
Specification: Part Number 1207971 Shock resistance: 10 g, 16 ms (EN 60068-2-27) PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Restart interlock (delivery status): Deactivated Conductor cross-section: 0.34 mm² External device monitoring (EDM): + External device monitoring (delivery status):
Specification: Part Number 1207857 TM (mission time): 20 a (EN ISO 13849) Switching current: 300 mA Cascaded: - Weight: 255 g Protective field height: 720 mm Response time: ≤ 13 ms Ripple: ≤ 10 % Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Ambient operating temperature: -20 °C ... +55 °C Restart interlock: + Safe state in the event of a fault: At least one OSSD is in the OFF
Specification: Part Number 1207934 Scanning range: 0 m ... 6 m External device monitoring (delivery status): Deactivated Storage temperature: -25 °C ... +70 °C Air humidity: 15 % ... 95 %, non-condensing Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Category: Category 2 (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Cascaded: - Response time: ≤
Specification: Part Number 1207813 Protection class: III (EN 61140) Housing material: Aluminum alloy ALMGSI 0.5 Test rate (internal test): 58 /s Safe SICK device communication via EFI/SDL: - Cable length: 700 mm TM (mission time): 20 a (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Permitted cable length: ≤ 20 m Restart interlock: + Type: Type 2 (IEC 61496) Shock resistance: 10 g, 1
