C2MT-06034BBC03FE0

Specification: Part Number 1207855 Housing cross-section (incl. system connection): 15 mm x 32 mm Ripple: ≤ 10 % Housing material: Aluminum alloy ALMGSI 0.5 Ambient operating temperature: -20 °C ... +55 °C Resolution: 34 mm Storage temperature: -25 °C ... +70 °C Enclosure rating: IP 65 (EN 60529) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cable length: 700 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Test rate (internal test): 58 /s Weight: 215 g Type: Type 2 (IEC 61496) Permitted cable length: ≤ 20 m Cascaded: - External device monitoring (delivery status): Deactivated Safe state in the event of a fault: At least one OSSD is in the OFF state. Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) TM (mission time): 20 a (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Power consumption: ≤ 3 A Shock resistance: 10 g, 16 ms (EN 60068-2-27) Scanning range: 0 m ... 6 m Synchronization: Optical, without separate synchronization Configuration method: Hard wired Maximum demand rate: 34 /min (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Protection class: III (EN 61140) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Beam coding: + Safe SICK device communication via EFI/SDL: - Protective field height: 600 mm Automatic beam coding: + Display elements: LEDs Response time: ≤ 13 ms Typical range: 0 m ... 8 m Connection type: Male connector M12, 5-pin Conductor cross-section: 0.34 mm² Switching current: 300 mA External device monitoring (EDM): + PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Category: Category 2 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Restart interlock: + Switching voltage LOW: 2 V DC Restart interlock (delivery status): Deactivated