C2MT-06614BBC03FE0

Specification: Part Number 1207802 Category: Category 2 (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Protection class: III (EN 61140) Cable length: 700 mm External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Conductor cross-section: 0.34 mm² Restart interlock (delivery status): Deactivated Protective field height: 660 mm Ambient operating temperature: -20 °C ... +55 °C Housing cross-section (incl. system connection): 15 mm x 32 mm TM (mission time): 20 a (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Beam coding: + Switching voltage LOW: 2 V DC Weight: 235 g Safe state in the event of a fault: At least one OSSD is in the OFF state. Connection type: Male connector M12, 5-pin Shock resistance: 10 g, 16 ms (EN 60068-2-27) Permitted cable length: ≤ 20 m Scanning range: 0 m ... 6 m Safe SICK device communication via EFI/SDL: - Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Restart interlock: + Enclosure rating: IP 65 (EN 60529) Display elements: LEDs Typical range: 0 m ... 8 m Switching current: 300 mA PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Power consumption: ≤ 3 A Ripple: ≤ 10 % Air humidity: 15 % ... 95 %, non-condensing Cascaded: - Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Resolution: 14 mm Type: Type 2 (IEC 61496) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Housing material: Aluminum alloy ALMGSI 0.5 Synchronization: Optical, without separate synchronization Test rate (internal test): 58 /s Response time: ≤ 14 ms Automatic beam coding: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Maximum demand rate: 34 /min (EN ISO 13849) Storage temperature: -25 °C ... +70 °C External device monitoring (delivery status): Deactivated Configuration method: Hard wired