C2MT-06614BBC04FE0

Specification: Part Number 1207875 Cable length: 700 mm Restart interlock (delivery status): Deactivated Power consumption: ≤ 3 A Automatic beam coding: + Protection class: III (EN 61140) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) TM (mission time): 20 a (EN ISO 13849) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Conductor cross-section: 0.34 mm² Protective field height: 660 mm Cascaded: + Connection type extension connection: Female connector M12, 5-pin Ambient operating temperature: -20 °C ... +55 °C Switching current: 300 mA Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Test rate (internal test): 47 /s Safe SICK device communication via EFI/SDL: - Resolution: 14 mm Ripple: ≤ 10 % Configuration method: Hard wired Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) External device monitoring (EDM): + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Response time: ≤ 14 ms Typical range: 0 m ... 8 m Air humidity: 15 % ... 95 %, non-condensing Housing material: Aluminum alloy ALMGSI 0.5 Category: Category 2 (EN ISO 13849) External device monitoring (delivery status): Deactivated Enclosure rating: IP 65 (EN 60529) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Housing cross-section (incl. system connection): 15 mm x 32 mm Switching voltage LOW: 2 V DC Display elements: LEDs Maximum demand rate: 28 /min (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Connection type: Male connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Beam coding: + Restart interlock: + Weight: 235 g Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Permitted cable length: ≤ 20 m Type: Type 2 (IEC 61496) Scanning range: 0 m ... 6 m