C2MT-06034BBC04FE0

Specification: Part Number 1207912 Protection class: III (EN 61140) Safe SICK device communication via EFI/SDL: - Resolution: 34 mm External device monitoring (EDM): + Switching voltage LOW: 2 V DC Enclosure rating: IP 65 (EN 60529) Connection type: Male connector M12, 5-pin Ambient operating temperature: -20 °C ... +55 °C Connection type extension connection: Female connector M12, 5-pin Type: Type 2 (IEC 61496) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Maximum demand rate: 28 /min (EN ISO 13849) External device monitoring (delivery status): Deactivated Test rate (internal test): 47 /s Configuration method: Hard wired Permitted cable length: ≤ 20 m TM (mission time): 20 a (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Display elements: LEDs Housing cross-section (incl. system connection): 15 mm x 32 mm Conductor cross-section: 0.34 mm² Restart interlock: + PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Scanning range: 0 m ... 6 m Response time: ≤ 13 ms Housing material: Aluminum alloy ALMGSI 0.5 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Ripple: ≤ 10 % Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Weight: 215 g Beam coding: + Air humidity: 15 % ... 95 %, non-condensing Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching current: 300 mA Cable length: 700 mm Storage temperature: -25 °C ... +70 °C Restart interlock (delivery status): Deactivated Power consumption: ≤ 3 A Category: Category 2 (EN ISO 13849) Protective field height: 600 mm Typical range: 0 m ... 8 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) Cascaded: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Automatic beam coding: +