C2MT-05434BBC03DE0

Specification: Part Number 1207854 External device monitoring (EDM): + Test rate (internal test): 58 /s Automatic beam coding: + Synchronization: Optical, without separate synchronization Connection type: Male connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Type: Type 2 (IEC 61496) Resolution: 34 mm Ambient operating temperature: -20 °C ... +55 °C Protection class: III (EN 61140) Maximum demand rate: 34 /min (EN ISO 13849) Switching voltage LOW: 2 V DC Air humidity: 15 % ... 95 %, non-condensing PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Configuration method: Hard wired Restart interlock (delivery status): Deactivated Permitted cable length: ≤ 20 m TM (mission time): 20 a (EN ISO 13849) Protective field height: 540 mm Category: Category 2 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safe SICK device communication via EFI/SDL: - Typical range: 0 m ... 8 m Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Response time: ≤ 13 ms Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Beam coding: + Ripple: ≤ 10 % Enclosure rating: IP 65 (EN 60529) Cascaded: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cable length: 350 mm Scanning range: 0 m ... 6 m Display elements: LEDs Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET External device monitoring (delivery status): Deactivated Restart interlock: + Switching current: 300 mA Power consumption: ≤ 3 A Conductor cross-section: 0.34 mm² Weight: 195 g Housing cross-section (incl. system connection): 15 mm x 32 mm