C2MT-05414BBC04DE0

Specification: Part Number 1207873 Enclosure rating: IP 65 (EN 60529) Configuration method: Hard wired Shock resistance: 10 g, 16 ms (EN 60068-2-27) Ripple: ≤ 10 % Cascaded: + Safe SICK device communication via EFI/SDL: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Restart interlock (delivery status): Deactivated Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Power consumption: ≤ 3 A Housing cross-section (incl. system connection): 15 mm x 32 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Typical range: 0 m ... 8 m Connection type extension connection: Female connector M12, 5-pin Response time: ≤ 14 ms Scanning range: 0 m ... 6 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Permitted cable length: ≤ 20 m PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Connection type: Male connector M12, 5-pin Synchronization: Optical, without separate synchronization External device monitoring (EDM): + Switching current: 300 mA Protective field height: 540 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Category: Category 2 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Test rate (internal test): 47 /s Protection class: III (EN 61140) Weight: 195 g Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs Storage temperature: -25 °C ... +70 °C Automatic beam coding: + External device monitoring (delivery status): Deactivated Conductor cross-section: 0.34 mm² Housing material: Aluminum alloy ALMGSI 0.5 Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Resolution: 14 mm Type: Type 2 (IEC 61496) Cable length: 350 mm Air humidity: 15 % ... 95 %, non-condensing TM (mission time): 20 a (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage LOW: 2 V DC Restart interlock: +