C2MT-05424BBC03DE0

Specification: Part Number 1207835 Automatic beam coding: + Maximum demand rate: 34 /min (EN ISO 13849) Switching current: 300 mA Power consumption: ≤ 3 A Synchronization: Optical, without separate synchronization Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Restart interlock (delivery status): Deactivated Weight: 195 g Configuration method: Hard wired Beam coding: + Storage temperature: -25 °C ... +70 °C Housing material: Aluminum alloy ALMGSI 0.5 Response time: ≤ 13 ms Switching voltage LOW: 2 V DC Type: Type 2 (IEC 61496) Scanning range: 0 m ... 6 m Enclosure rating: IP 65 (EN 60529) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Permitted cable length: ≤ 20 m TM (mission time): 20 a (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Housing cross-section (incl. system connection): 15 mm x 32 mm Resolution: 24 mm Ripple: ≤ 10 % Typical range: 0 m ... 8 m Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safe state in the event of a fault: At least one OSSD is in the OFF state. Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Category: Category 2 (EN ISO 13849) Cable length: 350 mm Test rate (internal test): 58 /s Air humidity: 15 % ... 95 %, non-condensing Protective field height: 540 mm External device monitoring (delivery status): Deactivated External device monitoring (EDM): + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Connection type: Male connector M12, 5-pin Restart interlock: + Display elements: LEDs Protection class: III (EN 61140) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe SICK device communication via EFI/SDL: - Cascaded: -