C2MT-05434BBC03DB0

Specification: Part Number 1207968 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Ambient operating temperature: -20 °C ... +55 °C TM (mission time): 20 a (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Enclosure rating: IP 65 (EN 60529) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored External device monitoring (delivery status): Deactivated Safe state in the event of a fault: At least one OSSD is in the OFF state. Response time: ≤ 13 ms Resolution: 34 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Configuration method: Hard wired Switching current: 300 mA Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Restart interlock (delivery status): Deactivated Protection class: III (EN 61140) Air humidity: 15 % ... 95 %, non-condensing Conductor cross-section: 0.34 mm² Cable length: 350 mm Connection type: Male connector M12, 5-pin Cascaded: - Permitted cable length: ≤ 20 m Ripple: ≤ 10 % PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Weight: 195 g Synchronization: Optical, without separate synchronization Beam coding: + Type: Type 2 (IEC 61496) Category: Category 2 (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Protective field height: 540 mm Scanning range: 0 m ... 6 m Switching voltage LOW: 2 V DC Test rate (internal test): 58 /s Power consumption: ≤ 3 A Display elements: LEDs Restart interlock: + Maximum demand rate: 34 /min (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Typical range: 0 m ... 8 m Automatic beam coding: + External device monitoring (EDM): +