C2MT-05434BBC04DE0

Specification: Part Number 1207911 Housing cross-section (incl. system connection): 15 mm x 32 mm Automatic beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Restart interlock: + Safe SICK device communication via EFI/SDL: - Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Protection class: III (EN 61140) Ambient operating temperature: -20 °C ... +55 °C Weight: 195 g Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Display elements: LEDs Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Connection type extension connection: Female connector M12, 5-pin Ripple: ≤ 10 % Permitted cable length: ≤ 20 m Switching voltage LOW: 2 V DC Housing material: Aluminum alloy ALMGSI 0.5 Air humidity: 15 % ... 95 %, non-condensing Maximum demand rate: 28 /min (EN ISO 13849) Configuration method: Hard wired Connection type: Male connector M12, 5-pin Power consumption: ≤ 3 A Cable length: 350 mm Response time: ≤ 13 ms Cascaded: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Category: Category 2 (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Scanning range: 0 m ... 6 m Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Synchronization: Optical, without separate synchronization TM (mission time): 20 a (EN ISO 13849) External device monitoring (delivery status): Deactivated Restart interlock (delivery status): Deactivated Resolution: 34 mm PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Beam coding: + Enclosure rating: IP 65 (EN 60529) Typical range: 0 m ... 8 m Type: Type 2 (IEC 61496) Safe state in the event of a fault: At least one OSSD is in the OFF state. Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Test rate (internal test): 47 /s Switching current: 300 mA Protective field height: 540 mm Conductor cross-section: 0.34 mm²