C2MT-05414BBC03DB0

Specification: Part Number 1207930 Connection type: Male connector M12, 5-pin Housing material: Aluminum alloy ALMGSI 0.5 Maximum demand rate: 34 /min (EN ISO 13849) Ripple: ≤ 10 % Conductor cross-section: 0.34 mm² Housing cross-section (incl. system connection): 15 mm x 32 mm Storage temperature: -25 °C ... +70 °C Safe SICK device communication via EFI/SDL: - Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Configuration method: Hard wired Restart interlock (delivery status): Deactivated Typical range: 0 m ... 8 m Automatic beam coding: + Protection class: III (EN 61140) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Beam coding: + External device monitoring (EDM): + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) TM (mission time): 20 a (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Permitted cable length: ≤ 20 m Power consumption: ≤ 3 A Cable length: 350 mm Protective field height: 540 mm Ambient operating temperature: -20 °C ... +55 °C Resolution: 14 mm Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Display elements: LEDs Response time: ≤ 14 ms Shock resistance: 10 g, 16 ms (EN 60068-2-27) Weight: 195 g Enclosure rating: IP 65 (EN 60529) Synchronization: Optical, without separate synchronization Type: Type 2 (IEC 61496) Category: Category 2 (EN ISO 13849) Switching current: 300 mA PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Scanning range: 0 m ... 6 m Restart interlock: + Test rate (internal test): 58 /s Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (delivery status): Deactivated Switching voltage LOW: 2 V DC Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET