C2MT-05414BBC03DE0

Specification: Part Number 1207800 Protection class: III (EN 61140) Typical range: 0 m ... 8 m Configuration method: Hard wired Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (EDM): + Conductor cross-section: 0.34 mm² Test rate (internal test): 58 /s Protective field height: 540 mm TM (mission time): 20 a (EN ISO 13849) Restart interlock: + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Type: Type 2 (IEC 61496) Permitted cable length: ≤ 20 m Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Ripple: ≤ 10 % Response time: ≤ 14 ms Safe SICK device communication via EFI/SDL: - Switching current: 300 mA Housing cross-section (incl. system connection): 15 mm x 32 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Ambient operating temperature: -20 °C ... +55 °C Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Maximum demand rate: 34 /min (EN ISO 13849) Resolution: 14 mm Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A External device monitoring (delivery status): Deactivated Category: Category 2 (EN ISO 13849) Scanning range: 0 m ... 6 m Automatic beam coding: + Weight: 195 g Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Synchronization: Optical, without separate synchronization Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Connection type: Male connector M12, 5-pin Cascaded: - Enclosure rating: IP 65 (EN 60529) Cable length: 350 mm Display elements: LEDs Storage temperature: -25 °C ... +70 °C Beam coding: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock (delivery status): Deactivated