C2MT-07214BBC04FE0

Specification: Part Number 1207876 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing material: Aluminum alloy ALMGSI 0.5 Type: Type 2 (IEC 61496) Resolution: 14 mm Test rate (internal test): 47 /s Connection type extension connection: Female connector M12, 5-pin Air humidity: 15 % ... 95 %, non-condensing Protection class: III (EN 61140) Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Switching voltage LOW: 2 V DC PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Protective field height: 720 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Cable length: 700 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Conductor cross-section: 0.34 mm² Power consumption: ≤ 3 A Typical range: 0 m ... 8 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Restart interlock (delivery status): Deactivated Ambient operating temperature: -20 °C ... +55 °C External device monitoring (delivery status): Deactivated Synchronization: Optical, without separate synchronization Restart interlock: + Connection type: Male connector M12, 5-pin Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Response time: ≤ 14 ms Display elements: LEDs Enclosure rating: IP 65 (EN 60529) Permitted cable length: ≤ 20 m Category: Category 2 (EN ISO 13849) Configuration method: Hard wired Weight: 255 g Beam coding: + Switching current: 300 mA Shock resistance: 10 g, 16 ms (EN 60068-2-27) Maximum demand rate: 28 /min (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) TM (mission time): 20 a (EN ISO 13849) Ripple: ≤ 10 % Cascaded: + External device monitoring (EDM): + Automatic beam coding: +