C2MT-07234BBC03FB0

Specification: Part Number 1207971 Shock resistance: 10 g, 16 ms (EN 60068-2-27) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Restart interlock (delivery status): Deactivated Conductor cross-section: 0.34 mm² External device monitoring (EDM): + External device monitoring (delivery status): Deactivated Power consumption: ≤ 3 A Type: Type 2 (IEC 61496) Automatic beam coding: + Storage temperature: -25 °C ... +70 °C Typical range: 0 m ... 8 m Connection type: Male connector M12, 5-pin Protection class: III (EN 61140) Protective field height: 720 mm Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Permitted cable length: ≤ 20 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Cable length: 700 mm Weight: 255 g Category: Category 2 (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Configuration method: Hard wired Ripple: ≤ 10 % Housing material: Aluminum alloy ALMGSI 0.5 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Resolution: 34 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching voltage LOW: 2 V DC Display elements: LEDs Ambient operating temperature: -20 °C ... +55 °C Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Safe state in the event of a fault: At least one OSSD is in the OFF state. Safe SICK device communication via EFI/SDL: - Cascaded: - Maximum demand rate: 34 /min (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock: + Switching current: 300 mA Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms Test rate (internal test): 58 /s Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Synchronization: Optical, without separate synchronization Beam coding: +