C2MT-07814BBC04FE0

Specification: Part Number 1207877 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Connection type: Male connector M12, 5-pin Safe SICK device communication via EFI/SDL: - Protective field height: 780 mm Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Housing cross-section (incl. system connection): 15 mm x 32 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Power consumption: ≤ 3 A Configuration method: Hard wired External device monitoring (delivery status): Deactivated Permitted cable length: ≤ 20 m Conductor cross-section: 0.34 mm² Typical range: 0 m ... 8 m Cascaded: + Test rate (internal test): 47 /s Restart interlock (delivery status): Deactivated Automatic beam coding: + PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Switching current: 300 mA External device monitoring (EDM): + Ripple: ≤ 10 % Connection type extension connection: Female connector M12, 5-pin Type: Type 2 (IEC 61496) TM (mission time): 20 a (EN ISO 13849) Switching voltage LOW: 2 V DC Enclosure rating: IP 65 (EN 60529) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Maximum demand rate: 28 /min (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Beam coding: + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Category: Category 2 (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Weight: 280 g Housing material: Aluminum alloy ALMGSI 0.5 Cable length: 700 mm Response time: ≤ 17 ms Display elements: LEDs Ambient operating temperature: -20 °C ... +55 °C Protection class: III (EN 61140) Resolution: 14 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Restart interlock: + Synchronization: Optical, without separate synchronization