C2MT-07834BBC03FB0

Specification: Part Number 1207972 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 34 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m Automatic beam coding: + Beam coding: + Safe SICK device communication via EFI/SDL: - Synchronization: Optical, without separate synchronization Safe state in the event of a fault: At least one OSSD is in the OFF state. Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock: + External device monitoring (delivery status): Deactivated PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Protection class: III (EN 61140) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Power consumption: ≤ 3 A Configuration method: Hard wired Maximum demand rate: 34 /min (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Display elements: LEDs Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (EDM): + Weight: 280 g Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Typical range: 0 m ... 8 m Switching voltage LOW: 2 V DC Restart interlock (delivery status): Deactivated Connection type: Male connector M12, 5-pin Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Type: Type 2 (IEC 61496) Air humidity: 15 % ... 95 %, non-condensing Enclosure rating: IP 65 (EN 60529) Cascaded: - Ambient operating temperature: -20 °C ... +55 °C TM (mission time): 20 a (EN ISO 13849) Protective field height: 780 mm Switching current: 300 mA Storage temperature: -25 °C ... +70 °C Permitted cable length: ≤ 20 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) Ripple: ≤ 10 % Response time: ≤ 13 ms Conductor cross-section: 0.34 mm² Cable length: 700 mm Category: Category 2 (EN ISO 13849)