C2MT-07834BBC03FE0

Specification: Part Number 1207858 Scanning range: 0 m ... 6 m Safe SICK device communication via EFI/SDL: - Display elements: LEDs Typical range: 0 m ... 8 m Cascaded: - External device monitoring (EDM): + Test rate (internal test): 58 /s Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing cross-section (incl. system connection): 15 mm x 32 mm Protective field height: 780 mm Restart interlock: + Conductor cross-section: 0.34 mm² Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type: Type 2 (IEC 61496) Power consumption: ≤ 3 A Restart interlock (delivery status): Deactivated Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Housing material: Aluminum alloy ALMGSI 0.5 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protection class: III (EN 61140) Enclosure rating: IP 65 (EN 60529) External device monitoring (delivery status): Deactivated PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Connection type: Male connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 34 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Beam coding: + Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. TM (mission time): 20 a (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Maximum demand rate: 34 /min (EN ISO 13849) Switching voltage LOW: 2 V DC Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Response time: ≤ 13 ms Category: Category 2 (EN ISO 13849) Weight: 280 g Switching current: 300 mA Automatic beam coding: + Cable length: 700 mm Ripple: ≤ 10 % Synchronization: Optical, without separate synchronization Ambient operating temperature: -20 °C ... +55 °C Configuration method: Hard wired