C2MT-07824BBC03FE0

Specification: Part Number 1207839 Display elements: LEDs Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Air humidity: 15 % ... 95 %, non-condensing Maximum demand rate: 34 /min (EN ISO 13849) External device monitoring (delivery status): Deactivated Restart interlock (delivery status): Deactivated Protective field height: 780 mm Restart interlock: + Connection type: Male connector M12, 5-pin Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) TM (mission time): 20 a (EN ISO 13849) Ripple: ≤ 10 % Typical range: 0 m ... 8 m Ambient operating temperature: -20 °C ... +55 °C Protection class: III (EN 61140) Cable length: 700 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Automatic beam coding: + Switching current: 300 mA Category: Category 2 (EN ISO 13849) Type: Type 2 (IEC 61496) Test rate (internal test): 58 /s Safe SICK device communication via EFI/SDL: - Beam coding: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Synchronization: Optical, without separate synchronization Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Shock resistance: 10 g, 16 ms (EN 60068-2-27) Resolution: 24 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Response time: ≤ 13 ms PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Configuration method: Hard wired Cascaded: - Permitted cable length: ≤ 20 m Enclosure rating: IP 65 (EN 60529) Weight: 280 g Conductor cross-section: 0.34 mm² Switching voltage LOW: 2 V DC External device monitoring (EDM): + Power consumption: ≤ 3 A Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Housing material: Aluminum alloy ALMGSI 0.5