C2MT-07214BBC03FE0

Specification: Part Number 1207803 Weight: 255 g Test rate (internal test): 58 /s Maximum demand rate: 34 /min (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Restart interlock (delivery status): Deactivated PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Resolution: 14 mm Switching current: 300 mA Switching voltage LOW: 2 V DC Beam coding: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Type: Type 2 (IEC 61496) Ambient operating temperature: -20 °C ... +55 °C Response time: ≤ 14 ms Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Ripple: ≤ 10 % Restart interlock: + Scanning range: 0 m ... 6 m Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Typical range: 0 m ... 8 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Protective field height: 720 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Protection class: III (EN 61140) External device monitoring (EDM): + Safe state in the event of a fault: At least one OSSD is in the OFF state. Enclosure rating: IP 65 (EN 60529) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) External device monitoring (delivery status): Deactivated Safe SICK device communication via EFI/SDL: - Housing material: Aluminum alloy ALMGSI 0.5 Configuration method: Hard wired Cascaded: - Category: Category 2 (EN ISO 13849) Conductor cross-section: 0.34 mm² Automatic beam coding: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Power consumption: ≤ 3 A Display elements: LEDs Air humidity: 15 % ... 95 %, non-condensing Permitted cable length: ≤ 20 m Cable length: 700 mm